Ontario’s Slow Down, Move Over Law Expands January 1, 2027. Here’s What Fleet Operators Should Review Now.
Highway maintenance, utility, waste collection, and roadside assistance vehicles are about to gain new legal protection. That protection depends on one thing: approaching drivers seeing your amber lights in time.
Starting January 1, 2027, a driver who passes a stopped garbage truck with its amber lights flashing, without slowing down, will be breaking the same law as one who passes a stopped police cruiser.
That’s the heart of Ontario’s expanded Slow Down, Move Over law. Protections that covered emergency vehicles and tow trucks will now extend to the crews who keep roads clear, power on, and services running.
For anyone who manages, builds, or equips these vehicles, one detail stands out. The law applies to qualifying vehicles that are stopped with their amber lights flashing. Your warning lights are what tell an approaching driver the law applies. If that driver can’t see them early enough, the protection can’t do its job.
Here’s what’s changing, what it means for your fleet, and five things worth checking before January.
The Changes at a Glance
- Effective date: January 1, 2027.
- Newly covered: Stopped highway maintenance vehicles, public utility vehicles (electricity, natural gas, water, and telecommunications), waste collection vehicles (garbage, recycling, and organics), and roadside assistance vehicles displaying flashing amber lights.
- Already covered: Stopped emergency vehicles with flashing red or red-and-blue lights, and tow trucks with flashing amber lights.
- What drivers must do: Slow down and pass with caution, considering traffic, road, and weather conditions. On roads with two or more lanes travelling in the same direction, move over to leave a lane of space when it’s safe to do so.
- The exception: Qualifying work vehicles stopped inside designated construction zones where reduced speed limits are already posted. Construction-zone rules still apply there.
- Penalties: A first offence carries a fine of $400 to $2,000, three demerit points on conviction, and a possible licence suspension. Repeat offences within five years can carry heavier consequences.
Roadside Risk Isn’t About Emergencies. It’s About Exposure.
Police, firefighters, paramedics, and tow operators have long been recognized as working in harm’s way. Now think about the rest of an ordinary day on Ontario roads.
A utility crew restoring power after a storm. A municipal truck stopped to repair damaged infrastructure. A waste collection operator making dozens of stops along a busy route. A maintenance crew clearing debris from the shoulder.
All of this essential work puts people within metres of moving traffic.
Risk isn’t set by just how urgent the work is. It’s set by how exposed the worker is, and the conditions they’re working in. Ontario’s expanded law finally recognizes that.
Visible Isn’t the Same as Understood
For more than 55 years, SWS Warning Lights has helped the organizations that build, equip, and operate essential service vehicles across Canada. The biggest lesson from that work: a warning light doesn’t protect anyone on its own. Its job is to give an approaching driver enough time to recognize a hazard and make a safer decision.
How well it does that depends on the application. Picture two vehicles, both flashing amber. One is a utility truck stopped on a highway shoulder, with workers stepping in and out beside live traffic. The other is a snowplow moving slowly through heavy snowfall. Same colour of light, different hazards, and a different response needed from the driver behind them.
That’s why effective visibility isn’t about installing the brightest light available. It’s about where the vehicle sits, what equipment surrounds the light, the conditions it works in, and what approaching traffic needs to recognize. A light mounted high may be clear from one angle and blocked from another by a raised body or attachment. Snow buildup, road spray, low winter sun, and heavy traffic all eat into the seconds a driver has to react.
The goal isn’t just to make a vehicle noticeable. It’s to make the hazard recognizable early enough to matter.
Your Vehicles Don’t Work in Just One Mode
A waste collection truck may stop dozens of times on a single route. A utility vehicle drives between job sites, then positions on a shoulder. A highway maintenance truck may crawl along, stop unexpectedly, or move between the shoulder and active lanes.
Your warning setup has to work across every one of those modes, not just the one the vehicle was spec’ed for.
It’s also worth being clear about what the new law does and doesn’t do. It adds responsibility for approaching drivers. It doesn’t change the responsibility fleet operators already carry for vehicle positioning, traffic control, safe work procedures, operator training, and warning equipment, all working together.
5 Things to Review Before January 1
The new rules don’t require you to replace or upgrade your warning equipment. But they do make the next few weeks a natural checkpoint. At SWS, every equipment conversation starts with the application, not the catalogue. The same approach works for a fleet review:
- Sightlines: Can approaching drivers see your warning signals from every direction they’re likely to encounter the vehicle?
- Configuration: Could raised bodies, booms, plows, attachments, or the vehicle’s working position block any of your lights?
- Conditions: Does your setup hold up in snow buildup, road spray, low sun, and darkness?
- Operator practice: Do your drivers know which signals to activate for the work they’re doing, and is that consistent across similar vehicles in the fleet?
- Jurisdictions: If your vehicles cross geographical boundaries, do your configurations and procedures fit the rules everywhere they operate?
Crossing Borders? The Rules Change at the Line.
Ontario is our home, but the fleets we support work across Canada and the United States. Slow Down, Move Over rules exist across the country, though who they cover and what drivers must do varies.
- British Columbia: The law covers stopped vehicles showing flashing red, blue, or yellow lights, including maintenance, utility, and other roadside service vehicles. Drivers must slow to 70 km/h where the posted limit is 80 km/h or higher, or to 40 km/h where it’s lower, and move over when safe.
- Alberta: Drivers approaching stopped roadside vehicles with flashing lights must move over when safe. When they can’t, they must slow to 60 km/h or the posted limit, whichever is lower.
- Quebec: The Move-Over Law, known as the corridor de sécurité, requires drivers to create a safe space around qualifying stopped vehicles displaying specified warning signals.
- United States: All 50 states have Move Over laws. Many have grown beyond emergency responders to include roadside service, maintenance, utility, and other vehicles, and some also protect disabled vehicles displaying hazard lights.
For fleets and upfitters working across North America, the lesson is simple: know where each vehicle will operate and which rules apply there. The principle underneath them is the same everywhere. People working on our roads need drivers to see them and give them room.
Lights, Laws, and Practice: All Three Have to Work
Warning equipment communicates the hazard. Safe work practices manage the exposure. Legislation sets the expectation for approaching drivers. Ontario’s expanded law strengthens one of those three. The other two are still in the hands of the people who build, equip, and run the fleet.
Planning a fleet review before January 1? Our team works with vehicle builders, municipalities, utilities, and fleet operators every day to match warning systems to the real conditions their vehicles face. If you’d like a second set of eyes on your setup, talk to an SWS specialist.
And share this with your drivers. When you see amber lights on a stopped work vehicle: slow down, move over, and give the crew room.
Whether someone is restoring power, clearing snow, collecting waste, or maintaining a highway, they deserve to get home safely at the end of their workday.